19-Oct , 23

Micro electric hoist precautions

  Matters needing attention

  1. Open the box. Be sure to open the tape paper wrapped around the rope drum and take it down before the machine can be tested. If the machine is tested in a hurry, it may cause the wire rope to reverse coil and damage the limit frame.

  2, should avoid the wire rope and the limit frame direct contact, otherwise it will lead to the limit switch failure, resulting in the micro electric hoist can not work normally.

  3, do not let the miniature electric hoist be rained or soaked in water, the protection level of the miniature electric hoist is IP54.

  4, the use of miniature electric hoist fuselage can not move or turn along the mounting rod.

  5, the standard power supply for the work of the miniature electric hoist is single-phase alternating current, and a socket with a ground wire must be used.

  6, warning: Ensure that all cables and the micro electric hoist on the rotating or heating parts to maintain the appropriate distance.

  7. The electric hoist is in a non-descending state, and the three rings of steel wire rope coated with red paint on the drum of the electric hoist cannot be released. If you continue to press the drop switch, the wire rope will be reversed around the rope drum, so that the electric hoist on the open drop operation is reversed, so that the limit switch will lose its function.
Miniature electric hoist

  1. please read the instructions carefully before using the miniature electric hoist.

  2. The installation position of the mini electric hoist hoist must be selected in an occasion that meets the needs and is easy to operate.

  3. it is necessary to regularly check whether the installation of the hoist is firm.

  4. Please do not overload the use of this elevator and do not know the weight of the lifting object.

  5. In the lifting can not be inclined to pull, diagonal lifting heavy objects to avoid danger.

  6. No one is allowed to stand under the lifting weight when the lifting machine is lifting heavy objects.

  7. When operating the wire rope, please wear thick gloves, please do not let the wire rope slip through your hand, so as not to cause slip or puncture injuries.

  8. This elevator shall not carry people in any way, or be used as an elevator lifting tool.

  9. The operator should not operate the hoist under the condition of drinking, taking medicine and being ill.

  10. Please do not arbitrarily modify or weld the parts of the elevator.

  11. When lifting the hoist, be sure to ensure that the rope barrel to retain less than 3 rings of wire rope, to prevent the wire rope force is too large from falling off the rope barrel.


Next: Product sample book

Previous: Market price comparison of steel plate lifters