1、 Classification

Steel plate lifting tongs can be divided into horizontal lifting tongs and vertical lifting tongs, overturning tongs, double-plate lifting tongs, single-plate lifting tongs, I-beam lifting tongs, steel pipe lifting tongs, round steel lifting tongs, tray clamps, and laminated steel plate tongs according to the lifting mode.

2、 Use of steel plate pliers

The horizontal hanging steel plate clamp has the characteristics of evenly distributed horizontal lifting. When lifting, open the jaw of the horizontal hanging clamp, firmly clamp it on the weight to be operated, and then lift it. When disassembling, the lifting tongs shall be removed without load after the heavy object is landed on the ground. The vertical hanging steel plate clamp is equipped with a self-locking device, which is safe and reliable, easy to operate, high efficiency and easy to maintain. It is widely used in automobile, aviation, metallurgy and other fields

3、 Precautions for use

1. The suspension and hanging operation must be carried out by a qualified person.

2. Use tongs that match the purpose.

3. It shall be used within the allowable load range and shall not be overloaded.

4. It is used within the allowable plate thickness.

5. Do not enter the lifting operation range or overturning area.

6. Do not knock or impact the lifting objects and slings.

7. Do not move or stop the lifting object sharply.

8. It is recommended to use more than two lifting tongs for safety to avoid excessive weight of lifting objects.

9. Before using the steel plate pliers, check the undercut, gasket, interdental blockage, wear status and other abnormalities, and then use them.

Next: Function of tension spring of steel plate lifting clamp

Previous: How to repair steel plate lifting tongs?