During the process of lifting steel plates, everyone hopes that the jaws of the steel plates can be clamped as tightly as possible, as this can ensure safety and stability during the lifting process. However, if the suspension practice is too long, the removal of the steel plate pliers becomes a headache.

      The flat hanging steel plate tongs cannot be in the state of lifting the steel plate for a long time. Once the steel plate is lifted to the designated position, it is necessary to remove the steel plate. However, due to the tight clamping of the flat hanging steel plate tongs, the workers cannot use their hand strength to remove the jaws in a short time. What can be done to release the jaws at this time?

      First, you can ask someone with a slightly stronger force to pull the pull ring of the flat hanging steel plate clamp. If it cannot be pulled, you can use an iron rod to tap the steel plate clamp several times, and when there is looseness between the jaw and the steel plate, you can remove the steel plate. In addition, in order to improve work efficiency and reduce labor cost waste, workers can use steel plate pliers with spring devices to solve the problem of flat hanging steel plate pliers clamping the steel plate too tightly.

Next: How to repair inclined steel plate lifting tongs? What if the steel plate lifting tongs tilt?

Previous: What are the three types of fixtures that can be divided according to their use characteristics?