When it is necessary to determine the position of the steel plate clamp, it is necessary to prevent the locking rod or spring hook from contacting the wire rope, chain, ring and hanging object during the roll-up or roll-off process; confirm whether the installation position of the steel plate clamp is higher than the balance point of the hanging object ;Confirm whether the locking device is in a good locked state;Confirm whether the steel plate clamps are fully inserted. In addition, the state of the hanging object when landing must be considered to determine the installation position, especially when the hanging object with poor stability when landing is quite dangerous.
When the steel plate clamp is working, it is strictly forbidden to enter the range where the hanging object may fall or overturn; do not carry out the work of clamping and lifting the steel plate placed vertically from the horizontal, otherwise it may cause dangerous accidents; Pay attention to the offset load when lifting the cable.
When lifting long-sized objects with steel plate clamps, use a balance and use multiple steel cables for lifting work; please be sure to use lifting cables and chains that meet the specifications. Before starting the lifting work, you must confirm that the cables and chains are on Are there any bends. It is strictly forbidden to use one hook and several clamps to clamp several hanging objects for lifting work, otherwise it may cause dangerous accidents; it is strictly forbidden to use one clamp to clamp more than two steel plates for lifting work, otherwise it may cause dangerous accident.
When the steel plate crane is unloading the hanging object or landing on the ground, please pay attention to the impact load when performing overturning work; the crane should be used slowly and carefully to avoid applying the impact load to the hanging object or the clamp. When placing special-shaped materials on the ground, be sure to use the anti-fall frame, and never hang the removed steel plate clamps on the hanging objects again.
Next: Monorail trolley
Previous: Little knowledge about shackles
2TC Series:The microelectric Stacker is a manual propulsion and electric stacker that provides cost-...
1tC Series:The microelectric Stacker is a manual propulsion and electric stacker that provides cost-...
Smooth surface, uniform color, specifications, information, clear CE markingMade of high quality all...
Rated load: 3.8TPurpose: The hook is mainly used as a connecting tool in lifting operationMaterial: ...