As human beings, we are looking for a job that suits us and our favorites during exploration, so the lifting clamp is the same. In different operating situations, its choices are also different. For example, on the lifting steel plate, horizontal hanging and How to choose the right lifting tongs?

1. When using the horizontal lifting steel plate, the lifting tongs need to choose the horizontal lifting lifting tongs, which are customized according to the way the horizontal lifting steel plate is used.

2. When using the vertical lifting steel plate, you need to use the vertical lifting lifting tongs, which are also specially designed for vertical lifting of the steel plate.

3. When using multi-layer steel plates for lifting, due to the thickness of the steel plates, there are also differences in selection. It is necessary to choose the lifting tongs for layer hoisting.

4. When the steel plate needs to be turned over, the turning lifting tongs should be used at this time.

5. If the type of steel plate is special, different lifting tongs should be selected. Such as I-beam and section steel, you need to use I-beam clamps. Round steel and round pipes need to use round steel and round pipe clamps. Special steel plate special treatment.

Therefore, the use of lifting tongs is different according to different operating conditions. It cannot be used for lifting. At this time, the lifting tongs play the role of handling.

Next: Which steel plates cannot be lifted by the steel plate clamp?

Previous: Inspection and management of steel plate clamp