Steel plate lifting pliers are divided into horizontal and vertical steel plate lifting pliers. When the steel plate lifting clamp is suspended horizontally, open the clamp. When the weight hits the ground, remove the lifting clip and release it. Vertical steel plate lifting pliers with self-locking device, easy to use, high efficiency, safety and so on. Steel plate lifting fixture is used in automobile, aviation, metallurgy and other places.

　　The key points of steel plate construction lifting pliers: first of all, we should choose the lifting pliers suitable for the purpose. Secondly, when using must not overload. Cannot exceed the clamping thickness. When working again, do not knock or impact the lifting device, do not make the suspension move or stop sharply, so as to avoid danger. In addition, before use, check the bite head, gasket, plug between teeth, wear state and other abnormal conditions to ensure normal use.

　　In short, do not exceed the load range. Again, the thickness of the steel plate must be appropriate, and the wear degree of the hoist pliers must be checked frequently. If it's out of range, it has to be scrapped.

Next: Lituo CDH vertical lifting steel plate pliers introduction

Previous: How to buy steel plate lifting pliers