1, irregular use or overload use of special tools. Each element has a clearly defined load. If overloaded, it will increase the wear of the component and cause the component to break.

　　2, before use, do not check whether the components are damaged. Before carrying out the lifting operation, we need to check the lifting tools to avoid the use of unsecured lifting tools for operation, thereby increasing the operational risk. If a tool with greater wear is used for operation, there is a risk that the tool will break during operation.

　　3, after the use, can not be cleaned and maintained in time, so as to avoid timely removal of impurities on the surface of the components, so that the components rust, damage.

　　Factors of lifting pliers rust:

　　1, the lifting pliers are strictly prohibited in the sun exposure, so as not to rust corrosion.

　　2, lifting pliers often apply lubricating grease and anti-rust grease, can effectively prevent rust.

　　3, the lifting pliers should be cleaned in time after rain or water, to avoid rust corrosion of the lifting pliers.

　　4, lifting pliers surface after the phenomenon of paint, should be timely paint, so as not to cause large areas of rust.

　　5, lifting pliers to clean regularly, if a long time do not clean debris is easy to cause erosion on the surface, resulting in rust lifting pliers.

　　The above also told you that the failure to clean and maintain in time is also the reason for the damage and rust of the lifting pliers, so we must pay attention to this aspect, I hope this article can help you.

Next: Lifting belt cleaning method

Previous: The monitoring and system of lifting tongs in the steel industry are not perfect