How to do if the main body tilts during the use of steel plate lifting pliers? First of all, we must determine what the cause is, let's first rule out improper manual operation and the quality of the product itself.

　　How to repair inclined steel plate lifting pliers?

　　1. Stop the construction work and remove the pliers.

　　2, open the screw used to grip the steel plate to loosen the clamping bolt, so as to adjust the tilt state of the lifting pliers itself. Let's see if we can fix it

　　3, if there is no solution, please follow the manual of the steel plate lifting pliers, carefully check the product. Whether there are cracks on the surface of the lifting pliers, whether the product components are incomplete, whether there is rust inside the product, whether there is sand. For example: LB series horizontal lifting steel plate lifting pliers, in order to increase product safety and lifting strength, rubber pads will be added on the hook to increase friction. If the worker improperly operates in the process of use, resulting in damage to the rubber pad, the main body will tilt.

　　4, the upper and end of the ring is the force point, the use of time beyond the years will naturally have wear, if the wear exceeds 10% to consider replacing the product.

　　5, when installing the steel clamp clamp, please pay attention to avoid the tilt of the spherical head. When the spherical chuck of the steel plate clamp is tilted, temporarily loosen the clamp bolt, correct the tilt state of the main body, and then install the spherical chuck.

　　In SUMMARY:

　　How to repair inclined steel plate lifting pliers? What if the steel plate lifting pliers tilt? First find out what causes the tilt. If it is improper operation of workers to learn the operation process, if it is serious product wear to consider replacing the product.

Next: Differences in the use of permanent magnet chuck and steel plate pliers

Previous: Steel pipe hook