Hand push monorail car to push lifting heavy objects driven, walking on the lower wing edge of the I-beam track, the hand hoist or other lifting machinery suspended in the lower part of the car, can be composed of manual lifting transport car, equipment in straight or curved monorail overhead transport line or manual single beam, bridge, cantilever crane, Widely used in factories, mines, wharves, docks, warehouses, computer rooms and other places to install machines, lifting goods, especially suitable for equipment maintenance without power address.

　　Note:

　　1. The car is prohibited from using beyond the extra load.

　　2. When the trolley is lifting heavy objects, no one is allowed to walk or operate under heavy objects.

　　3, bearing and rail surface should be regularly filled with grease, together to see whether the fasteners are loose.

　　Usage specification:

　　1. It is prohibited to overload monorail car.

　　2. When lifting heavy objects by monorail trolley, no one is allowed to walk or work under heavy objects.

　　3. When lifting heavy objects, the monorail car should make its weight in the I-steel web site plane, otherwise do not lift. Monorail car operation should make the hand chain force in the middle plane of the hand sprocket, do not stay.

　　4. Monorail car in case of abnormal hand pull, must not yank, should immediately stop using, check the reason.

　　5. The gear and rail surface of monorail car should be filled with lubricating oil regularly to check whether the fasteners are loose.

　　6 monorail small driver pull monorail car is to support the operation of I-steel, so deformation, distortion, cracking or does not meet the standard and have other defects of I-steel can not be used as a monorail car.

Next: Understand tank carrier

Previous: Introduce you to the monorail car