The lifting and handling tools used in the major steel factories are steel plate lifting pliers, its safety is related to the entire operation process is smooth, but also related to the personal safety of the surrounding operators, so it must be cleaned regularly, otherwise too much dirt will bury security risks, some netizens say that the clean is not clean, the following Xiaobian teach you the correct cleaning method:

　　First of all, we need to prepare soft wiping tools such as rags, try to avoid the use of cleaning tools such as steel balls, easy to scratch the equipment, if necessary, you can also prepare some special cleaning agents.

　　Secondly, clean with rags from top to bottom, especially for the rotating part of the steel plate pliers, as well as the joints of bolts and bearings at the gap, the gap can be wrapped in rags to clean the fine wire, if not timely clean up these dirt will be blocked in the operation, in the long run, not only reduce work efficiency, but also increase the wear degree of the steel plate pliers, reduce short life.

　　Finally, if there is a lubricating part, it is necessary to re-apply new grease after cleaning, and the oil with impurities will not only fail to lubricate, but will hinder the normal operation of the steel plate pliers.

　　In addition, the thread part of the steel plate hoist also needs to be cleaned, which can be cleaned with a soft brush, because the thread is to increase the friction to achieve the purpose of clamping tightly, and must be wiped clean, without leaving any grease, to prevent the occurrence of slippage in use.

Next: Use method and safety code of steel plate hoist

Previous: How to store steel plate lifters for large ships to reduce damage?