Tank truck is a common logistics handling tools for transporting goods, common manual hydraulic trucks, semi-electric trucks, ring electric trucks, explosion-proof trucks, etc., it not only improves labor efficiency, but also realizes safe transfer, and is favored by customers. Some of the most common technical parameters of tank carriers are explained as follows:

　　1. Net weight

　　Net weight is also known as self-weight, which refers to the weight of the fully equipped tank carrier, generally counted in kg. The net weight of a tank carrier is a technical index indicating the quality of the carrier.

　　2. Load capacity (rated load)

　　Load, also known as rated load, refers to the maximum rated load weight when the tank carrier is loaded, that is, the distance between the vertical forearm of the fork in the middle of the goods is not greater than the distance between the loads, allowing the maximum weight of the goods to be lifted, in t.

　　3. Total weight

　　The total weight refers to the sum of the net weight and carrying capacity of the tank carrier.

　　4, tank carrier dimensions

　　The outline size of the tank carrier refers to the total length, total width and total height of the vehicle. In order to make the tank carrier have better mobility, its outline size should be reduced as far as possible.

　　5, load xin distance

　　Load distance refers to the horizontal distance of the forearm of the vertical section of the fork when the standard goods are placed on the fork.

　　6. Maximum climb

　　The maximum gradient of the tank carrier refers to the maximum gradient that the carrier can climb when it is unloaded and fully loaded, under normal road conditions, at low speed and constant speed, usually expressed in degrees or percentages.

Next: The correct use of lifting chain

Previous: Method of use of turning pliers