Steel plate pliers is a light small lifting equipment used in the steel factory director, according to the type of steel plate, steel plate pliers models are also very complete, for example, horizontal lifting steel plate pliers, vertical lifting steel plate pliers, flipping pliers, oil bucket lifting pliers, wooden clamp, etc., very convenient and safe to use, but in the specific use of some lifting methods are wrong, should be avoided, as follows:

　　1, in the use of a single vertical lifting steel plate pliers, the pliers are not stuck in the middle of the steel plate, this time is not allowed to lift, easy to cause the steel plate fall, hurt the surrounding personnel.

　　2. When the steel plate is not inserted into the bottom of the pliers when the steel plate is used for lifting, this lifting method is also very dangerous, and it must be carefully checked before lifting.

　　3. When lifting steel plates in vertical lifting, the steel plate pliers are not placed symmetrically on both sides of the steel plate.

　　4, CDH type vertical lifting steel plate lifting pliers in use at one time only allow to lift one steel plate, do not allow multiple plates to lift at the same time, if you need multiple plates at the same time can be used laminated steel plate lifting pliers.

　　5, the weight of the steel plate is not allowed to be used rashly, because it is very easy to cause overload, and the consequences of overload are unimaginable.

　　If we do not have similar operating experience in the use of steel plate pliers, it is recommended to carefully read the instruction manual and strictly follow the operation procedures. If there is confusion, you can consult the manufacturer's sales staff to minimize and avoid accidents.

Next: Vertical lifting of heavy lifting pliers such storage and maintenance can "prolong life"

Previous: Use method and safety code of steel plate hoist