20-Mar , 25
Instructions for use
Every time you use the seat belt, you must make an appearance inspection, and pay attention to it during use, and test it once in half to 1 year.
The main parts are not damaged for the requirements, if found damaged deterioration in time to reflect, and stop use, to ensure the safety of operation.
Usage method
The speed difference automatic controller is fixed and suspended above the operation point. The rope in the automatic controller and the upper half ring of the safety belt can be connected and the rope can be pulled out arbitrarily to work in a certain position. After the work is finished, the person moves upward, and the rope is automatically recovered from the automatic controller. The automatic control is affected by the speed during the fall
Apply brake control. During the test, the length of the rope is 0.8m, and the sliding distance of the simulated human body is required to be no more than 1.2m.
REQUEST A QUOTEDESCRIPTION
2. Check the safety rope and appearance before using the anti-fall device, and try to lock it 2 to 3 times (test lock method: Pull out the safety rope at normal speed should make a "click" and "click" sound; Pull hard on the safety line. It should lock. When let go of the safety rope should be able to automatically recover into the device, such as the safety rope is not fully recovered, just pull out some safety rope can be). Stop using if there is an exception.
3, the use of anti-fall device tilt operation, in principle, the tilt does not exceed 30 degrees, more than 30 degrees must consider whether it can hit the surrounding objects.
4, the key parts of the anti-fall device have been special treatment such as wear resistance, corrosion resistance, and have been carefully adjusted, and do not need to add lubricants when used.
5, the anti-fall device is strictly forbidden to use the safety rope knot. Disassembly and refitting are strictly prohibited. And should be kept in a dry place with little dust.
TAG:
Human body retarder2TC Series:The microelectric Stacker is a manual propulsion and electric stacker that provides cost-...
1tC Series:The microelectric Stacker is a manual propulsion and electric stacker that provides cost-...
Smooth surface, uniform color, specifications, information, clear CE markingMade of high quality all...
Rated load: 3.8TPurpose: The hook is mainly used as a connecting tool in lifting operationMaterial: ...
REQUEST A QUOTE