CDH type vertical steel plate hoisting pliers Purpose: Vertical lifting of steel plates.

CDH type vertical steel plate lifting clamp load range: 0-10 tons.

CDH type vertical steel plate lifting clamp material: made of high-quality low-carbon alloy steel.

The working method of CDH type vertical steel plate hoisting tongs: take one test as the rated load, and use one or two supporting tongs in the hoisting operation.

Cautions for CDH type vertical steel plate hoisting clamps: The crane can lift one steel plate at the same time, stacked lifting is prohibited, and additional lifting objects may be collided during the lifting process. When lifting, the locking handle must be turned up to tighten the spring, and when unloading, the locking handle must be turned down, and the clamp and the steel plate can be separated only after the spring is relaxed.

CDH type vertical steel plate lifting clamp test load: the test load is twice the working load. Overloading is strictly prohibited.

Next: What are the advantages of forged steel plate clamps compared to ordinary steel plate clamps?

Previous: Scrap standard for lifting tongs and chains