The shape of the steel plate hanging pliers is very similar to chicken feet. It needs to be cleaned when it is used. Sometimes it can only clean the dirt on the surface when cleaning. It is not easy to clean off some corners and edges. It will be used for a long time. There will be danger, and this needs to be carefully cleaned up. How to clean it up? Let me explain it to you.

Because the links of various parts of the steel plate clamp are very complicated, we need to clean them patiently. When cleaning, we need to use soft things such as rags to clean them. Items that are easy to damage the mechanical surface, such as steel wool, will pose a threat to the surface. Yes, if it doesn't work, you can use a special cleaning agent.

The second is to use a rag to clean it from top to bottom, especially the rotating parts of the steel plate - bolts, bearings and threads, etc., can not be sloppy, because these rotating parts will be damaged when they are not cleaned. Interference will occur, which increases the wear and tear on the machine and speeds up the scrapping of the steel plate clamp.

When cleaning, you must pay attention to the lubricating oil on the fuselage. Don’t clean it up when you see lubricating oil. Once there is dust on the lubricating oil, it means it is polluted, not only will it not play a role in lubrication On the contrary, it will hinder the work of the steel plate clamp, so the cleaning of the lubricating oil is about 15 days a cycle, the specific situation needs to be treated differently, and the lubricating oil needs to be re-lubricated after cleaning.

Next: Cause Analysis of Accidents Occurring in Lifting Tongs

Previous: Problems that should be paid attention to when using horizontal hanging steel plate clamps