Horizontal hanging steel plate clamp is a kind of hoisting and transportation tool for horizontal hanging and horizontal hanging steel plate. Horizontal hanging steel plate clamp has been widely used in industry. So how do we use it? What problems should be paid attention to when using it?

1. It should be checked before lifting that the balance point of the steel plate should be located at the midpoint of the polygon formed by the two sets of steel plate lifting clamps;

2. After the steel plate is hoisted, it should be in a horizontal state. When the angle between the steel plate and the horizontal plane is greater than 7 degrees, the position of the horizontal hanging steel plate clamp should be readjusted;

3. During the operation of the horizontal hanging steel plate clamp, there should be no personnel in the dangerous area below it;

4. Select the appropriate horizontal hanging steel plate clamp according to the weight and thickness of the steel plate, and overloading is strictly prohibited;

5. During the lifting process, it is strictly forbidden for the hoisted steel plate to be collided and impacted;

6. Do not carry out overlapping lifting and backing plate lifting work of more than two pieces;

7. Use horizontal hanging steel plate clamps within the allowable load range and plate thickness range;

8. Products that cannot be repaired should be discarded immediately to prevent dangerous accidents caused by misuse;

9. Avoid the rapid movement or quick stop of the dropped heavy objects, and prevent the heavy objects from hitting or slipping;

10. Do not use horizontal hanging steel plate clamps for lifting operations with a steel cable (except for special and special products);

11. During operation, the horizontal hanging steel plate clamp must be inserted to the bottom until the steel plate touches the inner wall of the horizontal hanging steel clamp.

The above are the problems that need to be paid attention to in the horizontal hanging steel plate hanging tongs. I hope that everyone can use the horizontal hanging steel plate hanging tongs correctly to prevent accidents.

Next: How to remove the dead corner dirt of the steel plate clamp?

Previous: Problems that should be paid attention to when using the vertical hanging steel plate clamp